hello, im building a 468 that is going to run on alcohol, the short block is done, it has a 4.00 stroke crank ls7 floating forged rods, and 13:1 srp forged pistons with a 119cc head, i plan on running my ls6 crate engine heads #188 castings, i have a weiand team g intake and 1050 dominator built by bo law racing for alky, i need some help on selecting a camshaft for this motor, its going in a 4500lb 3/4 scale monster truck.
KICHLER Welcome to Car Craft....You didn't mention if you wanted to run a Hydraulic Roller, Hydraulic Flat Tappet, Mechanical Roller, or Mechanical Flat Tappet.What type trans do you haveWhat Rear Gear Ratio do you think you have with the big tires.Anything else you can ad would be great. Lunati has some newer cams.Bob
Its between a solid tappet and solid roller, ill be running a th400 and 6:72 gears in the diffs, with 1.65:1 gears in my scs transfer case.Thanks
Lunati Solid Roller P/N 401109022 .276/.284 @.50 .722/.722 lift 4200-7800 Max RPMLunati Solid Roller P/N 40110907.279/.279 @.050 ..680/.695 Max RPMCrane Cams Mechanical Flat Tappet Grind Number F-270/3867-2S-10.270/.276 @ .050 .657/.620 Max RPMCrane Solid Roller P/N R-276/420-2S1-14.276/.280 @ .050 .714/.714 Max RPM Good Alcohol camCrane Solid Roller P/N R-282/420-2-12.282/.292 @ .050 .714/.714 4800-8200Max RPMHope those helpBob