|
Num Posts
Sort Order
|
Racer_23
New User
| Posts: 2
| Joined: 06/08
Posted: 06/13/08
08:13 PM
|
|
I had this motor bulit for me
http://www.carcraft.com/techarticles/440hp_vortec_small_block/index.html
and am racing it on a 1/4 paved oval. I am running approx. 6000 rpm's.
My question is what should I set the timing at for maximum power. I was told 32 degrees.
ALSO; What should I set the plug gap at.
Thank you ![]()
|
|
Posted: 06/29/08
06:55 PM
|
|
32-38 degrees is what vortec heads seem to like......need to know what you run for ignition to tell you plug gaps
|
Racer_23
New User
| Posts: 2
| Joined: 06/08
Posted: 07/24/08
09:48 PM
|
|
![]() HateHondaNotDubs:
32-38 degrees is what vortec heads seem to like......need to know what you run for ignition to tell you plug gaps
This would be the exact ignition I am running. You will have to copy & Paste into a new browser.
http://cgi.ebay.com/ebaymotors/SBC-BBC-CHEVY-HEI-DISTRIBUTOR-65K-COIL-RED-8909R_W0QQcmdZViewItemQQcategoryZ33690QQihZ016QQitemZ260263427845QQrdZ1QQsspagenameZWDVW
|
|
|